1-800-GO-VEXTA (468-3982)

Free Shipping for Online Orders. Terms and conditions apply.

Linear Actuators > Controllers / Network Gateways > Network Gateways

Network Gateways

The communication protocol of the master controller, Factory Automation (FA) network, is converted to Oriental Motor's own RS-485 communication protocol. Connection to Oriental Motor's network compatible products is completed with one RS-485 communication cable.

Compatible Networks:
CC-Link, MECHATROLINK-II, MECHATROLINK-III, EtherCat

*For use with Stored Data (Network) type drivers.

Product Lineup
Product Features
Downloads & Reference

Product Lineup

Item	Network	Power Supply	Baud Rate
NETC01-ECT	EtherCAT	24 VDC ±10% 0.2A	100 Mbps
NETC01-CC	CC-Link	24 VDC ±10% 0.2A	156kbps/625kbps/2.5Mbps/5Mbps/10Mbps
NETC01-M2	MECHATROLINK - II	24 VDC ±10% 0.2A	10Mbps
NETC01-M3	MECHATROLINK - III	24 VDC ±10% 0.2A	100Mbps

Industrial Network Communication for Automation and Motion Control

Oriental Motor offers industrial network communication products under the FLEX concept, meaning each product is equipped with an interface that connects to various industrial networks and master controllers featuring I/O; such as PLC, HMI or serial communication such as RS-485 / Modbus (RTU).

FLEX is the generic name for products that are used for Factory Automation (FA) network control via I/O control, Modbus (RTU) control, or a network converter. FLEX products enable easy connection, easy control, and reduce the complexity of system configuration.

Network Gateways for Factory Automation (FA) Networks

industrial network

By using a network gateway, CC-link or MECHATROLINK communication are possible. Operating data, parameter settings or operation commands can be easily input.

CC-Link Control / MECHATROLINK Control / EtherCat Control

By using a network converter (sold separately), CC-link communication, MECHATROLINK communication and EtherCat communication are possible. Operating data, parameter settings or operation commands can be input via various types of communication. Since it can flexibly accommodate the networks specified by the end user, design time is shortened.

The burden on the programmable master controller is reduced and costs are lowered when multiple axis are used.
Compatible with various networks, allows for multiple axis or additional axis if needed.
- CC-Link compatibility: Max. 12 axis
- MECHATROLINK-II compatibility: Max. 16 axis
- MECHATROLINK-III compatibility: Max. 16 axis
- EtherCat compatibility: Max. 16 axis
Can also handle group sending function between groups