AC Motors & Gear Motors > Constant Speed AC Motors > Induction Motors > Single-Phase Induction Motors > BH Series Single-Phase AC Motors & Gear Motors
BH Series Single-Phase AC Motors & Gear Motors
BH Series Single-Phase AC Motors & Gear Motors
The smallest high torque 1/4 HP AC induction motors, 4.09 in. (104 mm) and conforms to major safety standards and supports global power supply voltages.
- 200 W (1/4 HP)
- Parallel Shaft and Right-Angle Hypoid Gear Types or Round Shaft models
- Brake Motors Available
- Cable Type
AC Gear Motor Lineup
Output Power |
Type |
Gear Type |
Output Shaft |
Options |
Power Supply |
Permissible Torque* |
|
|
Cable |
Parallel Shaft |
18 mm |
Electromagnetic Brake |
Single-Phase 110/115 VAC Single-Phase 220/230 VAC |
36 ~ 350 lb-in |
4.1 ~ 40 N·m |
Right-Angle Solid Shaft |
22 mm |
48 ~ 530 lb-in |
5.5 ~ 60 N·m |
||||
Right-Angle Hollow Shaft |
25 mm |
48 ~ 530 lb-in |
5.5 ~ 60 N·m |
||||
Round Shaft (no Gear) |
14 mm |
210 oz-in |
1.52 N·m |
||||
*Torque and Speed vary based on input voltage and frequency, please review product specifications for details.
High Power 200 W (1/4 HP) AC Gear Motors
The BH Series offers the smallest frame size among 200 W (1/4 HP) motors.
Combination Type for Easy Installation
The combination type comes with the motor and gearhead pre-assembled. This enables easy installation in equipment.
Conforms to Major Safety Standards and Global Power Supply Voltages
The BH Series is recognized by UL and CSA and certified under the China Compulsory Certification System (CCC System). CE Marking is used in accordance with Low Voltage Directive. Additionally, our wide range of products include those that meet the power supply voltages of major countries in Asia, North America and Europe.
Types of Motors
Induction Motors & Gear Motors |
Induction motors are optimal for uni-directional operation such as a conveyor system. |
Types of Gearheads & Gear Motors
Parallel Shaft |
Right-Angle Hypoid |
 Up to 350 lb-in of torque |
Up to 530 lb-in of torque |
Offset Parallel Shaft Tapped Hole at the Shaft End |
Hypoid Gear Right-Angle Gearheads Hollow Shaft and Solid Shaft Types are Available |
Flexible Couplings
These products are clamp type couplings used to connect a motor or gearhead shaft to the shaft of the equipment.
Capacitor Connector Lead Wires (5 Sets)
Lead wire set for AC motor capacitors.
- 5 sets 1 part number = 5 sets (10 lead wires). 5 White / 5 Red
- Be sure to use capacitor cover
Mounting Bracket
This is an aluminum die cast mounting bracket for geared motors.
Long, horizontal holes make it easy to make fine adjustments during installation.
*For use with Parallel Shaft or Round Shaft types.
Motor Types |
Item |
Parallel Shaft Gear Round Shaft (no Gear) |
CAD / Manual Search
To locate product CAD and Operator Manuals please search using the product Item Number.
Downloads
Videos
Technical Articles
Reference
Videos
