The smallest high torque 1/4 HP AC induction motors, 4.09 in. (104 mm) and conforms to major safety standards and supports global power supply voltages.
Output Power |
Type |
Gear Type |
Output Shaft |
Options |
Power Supply |
Permissible Torque* |
|
Cable |
Parallel Shaft |
18 mm |
Electromagnetic Brake |
Three-Phase 200-230 VAC |
36 ~ 350 lb-in |
4.1 ~ 40 N·m |
|
Right-Angle Solid Shaft |
22 mm |
48 ~ 530 lb-in |
5.5 ~ 60 N·m |
||||
Right-Angle Hollow Shaft |
25 mm |
48 ~ 530 lb-in |
5.5 ~ 60 N·m |
||||
Round Shaft (no Gear) |
14 mm |
210 oz-in |
1.52 N·m |
*Torque and Speed vary based on input voltage and frequency, please review product specifications for details.
The BH Series offers the smallest frame size among 200 W (1/4 HP) motors.
The combination type comes with the motor and gearhead pre-assembled. This enables easy installation in equipment.
The BH Series is recognized by UL and CSA and certified under the China Compulsory Certification System (CCC System). CE Marking is used in accordance with Low Voltage Directive. Additionally, our wide range of products include those that meet the power supply voltages of major countries in Asia, North America and Europe.
Induction Motors & Gear Motors |
Induction motors are optimal for uni-directional operation such as a conveyor system. |
Lead Wire Type |
Parallel Shaft |
Right-Angle |
Up to 350 lb-in of torque |
Up to 530 lb-in of torque |
Offset Parallel Shaft Tapped Hole at the Shaft End |
Hypoid Gear Right-Angle Gearheads Hollow Shaft and Solid Shaft Types are Available |
With its high functionality, compact design, simple operation and global compatibility, the new FRENIC-Mini (C2) elevates the performance of a wide range of devices and equipment--including conveyors, fans, pumps, centrifugal separators, and food processing machines--to give you the system integration, energy efficiency, reduced labor, and lower overall costs you're looking for.
The torque arm serves as an anti-rotation guide for the gearhead when a right-angle hollow-shaft type gearhead is mounted on the shaft of a connected device.
Motor Types |
Item |
Right-Angle Hollow Shaft |
These products are clamp type couplings used to connect a motor or gearhead shaft to the shaft of the equipment.
This is an aluminum die cast mounting bracket for geared motors.
Long, horizontal holes make it easy to make fine adjustments during installation.
*For use with Parallel Shaft or Round Shaft types.
Motor Types |
Item |
Parallel Shaft Gear Round Shaft (no Gear) |
This product is used to protect the contacts of a relay or switch used in the forward/reverse circuit section or the instantaneous stop circuit section of a motor.
To locate product CAD and Operator Manuals please search using the product Item Number.